show ipsla mpls lsp-monitor summary
To display the list of operations that have been created automatically by the specified MPLS LSP monitor
(MPLSLM) instance, use the show ipsla mpls lsp-monitor summary command in EXEC mode.
show ipsla mpls lsp-monitor summary [monitor-id [group [group id]]]
Syntax Description
(Optional) Displays a list of LSP group, ping, and trace operations created
automatically by the specified MPLSLM instance.
monitor-id
(Optional) Displays the ECMP LSPs found through ECMP path discovery
within the specified LSP group.
group group-id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.5.0
Show output response was expanded to add a pending status when
waiting for an LSP ping or trace response.
Release 3.7.0
Usage Guidelines
The show ipsla mpls lsp-monitor summary command shows the list of LSP operations that were created
automatically by the specified MPLS LSP monitor instance. It also shows the current status and the latest
operation time of each operation.
If the monitor-id argument is not specified, the list of operations is displayed for all MPLS LSP monitor
instances.
The show ipsla mpls lsp-monitor summary command with the group option shows the list of ECMP paths
that are found automatically by the specified LSP path discovery (LPD). In addition, this command with
option shows the current status; the number of successes, failures; the most recent round trip time (RTT); and
the latest operation time of each path.
If the group-id argument is not specified, the list of paths is displayed for all operations created by the MPLS
LSP monitor instance.
Task ID
OperationsTask ID
readmonitor
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
230 OL-24735-01
IP Service Level Agreement Commands
show ipsla mpls lsp-monitor summary
To Next Page
Loading...
Need help?
General
