Cisco XR 1200 series User Manual

action (IP SLA)
To specify what action or combination of actions the operation performs when you configure the react
command or when threshold events occur, use the action command in the appropriate configuration mode.
To clear action or combination of actions (no action can happen), use the no form of this command.
action {logging| trigger}
no action {logging| trigger}
Syntax Description
Sends a logging message when the specified violation type occurs for the monitored element.
The IP SLA agent generates a syslog and informs SNMP. Then, it is up to the SNMP agent
to generate a trap or not.
logging
Determines that the operation state of one or more target operations makes the transition
from pending to active when the violation conditions are met. The target operations to be
triggered are specified using the ipsla reaction trigger command. A target operation continues
until its life expires, as specified by the lifetime value of the target operation. A triggered
target operation must finish its life before it can be triggered again.
trigger
Command Default
None
Command Modes
IP SLA reaction condition configuration
IP SLA MPLS LSP monitor reaction configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
This command was added to IP SLA MPLS LSP monitor reaction
configuration mode.
Release 3.5.0
Usage Guidelines
For the action command to occur for threshold events, the threshold type must be defined. Absence of threshold
type configuration is considered if the threshold check is not activated.
When the action command is used from IP SLA MPLS LSP monitor reaction configuration mode, only the
logging keyword is available.
If the action command is used in IP SLA operation mode, the action defined applies to the specific operation
being configured. If the action command is used in IP SLA MPLS LSP monitor mode, the action defined
applies to all operations associated with the monitored provider edge (PE) routers. This configuration is
inherited by all LSP operations that are created automatically.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 117
IP Service Level Agreement Commands
action (IP SLA)

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English