Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to use the action command with the logging keyword:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# reaction operation 432
RP/0/0/CPU0:router(config-ipsla-react)# react connection-loss
RP/0/0/CPU0:router(config-ipsla-react-cond)# action logging
The following example shows how to use the action command from the IP SLA MPLS LSP monitor reaction
configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# reaction monitor 1
RP/0/0/CPU0:router(config-ipsla-mplslm-react)# react connection-loss
RP/0/0/CPU0:router(config-ipsla-mplslm-react-cond)# action logging
Related Commands
DescriptionCommand
Configures MPLS label switched path (LSP)
monitoring.
mpls lsp-monitor, on page 172
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Configures MPLS LSP monitoring reactions.reaction monitor, on page 197
Configures certain actions that are based on events
under the control of the IP SLA agent.
reaction operation, on page 199
Specifies an element to be monitored for a reaction.react, on page 192
Sets the lower-limit and upper-limit values.threshold, on page 267
Takes action on average values to violate a threshold.threshold type average, on page 269
Takes action after a number of consecutive violations.threshold type consecutive, on page 271
Takes action immediately upon a threshold violation.threshold type immediate, on page 273
Takes action upon X violations in Y probe operations.threshold type xofy, on page 275
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
118 OL-24735-01
IP Service Level Agreement Commands
action (IP SLA)
To Next Page
Loading...
Need help?
General
