Cisco XR 1200 series User Manual

Log Buffer (16384 bytes):
LC/0/1/CPU0:May 24 22:20:13.043 : init[65540]: %INIT-7-INSTALL_READY : total time 47.522
seconds
This table describes the significant fields shown in the display.
Table 31: show logging Field Descriptions
DescriptionField
If enabled, system logging messages are sent to a
UNIX host that acts as a syslog server; that is, the
host captures and saves the messages.
Syslog logging
If enabled, the level and the number of messages
logged to the console are stated; otherwise, this field
displays “disabled.”
Console logging
If enabled, the minimum level of severity required
for a log message to be sent to the monitor terminal
(not the console) and the number of messages logged
to the monitor terminal are stated; otherwise, this field
displays “disabled.”
Monitor logging
If enabled, the minimum level of severity required
for a log message to be sent to the syslog server and
the number of messages logged to the syslog server
are stated; otherwise, this field displays “disabled.”
Trap logging
If enabled, the level and the number of messages
logged to the buffer are stated; otherwise, this field
displays “disabled.”
Buffer logging
Related Commands
DescriptionCommand
Clears messages from the logging buffer.clear logging, on page 303
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 347
Logging Services Commands
show logging

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English