Table 10: show event manager metric process Field Descriptions
DescriptionField
Number assigned as the job identifier.job id
Node with the process running.node name
Name of the process running on the node.process name
Instance or thread of a multithreaded process.instance
Component of which the process is a member.comp id
Specific software version or release of which the
process is a member.
version
Last event type on the node.last event type
Most recent end type.recent end type
Last time the process was started.recent start time
Last time the process was stopped normally.recent normal end time
Last time the process was terminated abnormally.recent abnormal end time
Reason for the last abnormal process termination. For
example, the process was aborted or crashed.
recent abnormal end type
Number of times the process has been started.number of times started
Number of times the process has been stopped
normally.
number of times ended normally
Number of times the process has stopped abnormally.number of times ended abnormally
Times of the last ten process starts.most recent 10 process start times
Total time the process has been available.cumulative process available time
Total time the process has been out of service due to
a restart, abort, communication problems, and so on.
cumulative process unavailable time
Uptime percentage of the process (time running—the
duration of any outage).
process availability
Number of times the process has stopped abnormally
within the last 60 minutes.
number of abnormal ends within the past 60 minutes
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
98 OL-24735-01
Embedded Event Manager Commands
show event manager metric process
To Next Page
Loading...
Need help?
General
