Cisco XR 1200 series User Manual

DescriptionCommand
Configures MPLS label switched path (LSP) provider
edge (PE) router discovery.
mpls discovery vpn, on page 170
Configures MPLS label switched path (LSP)
monitoring.
mpls lsp-monitor, on page 172
Configures an IP SLA operation.operation, on page 174
Configures certain actions that are based on events
under the control of the IP SLA agent.
reaction operation, on page 199
Defines a second IP SLA operation to make the
transition from a pending state to an active state when
one of the trigger-type options is defined with the
reaction operation command.
reaction trigger, on page 201
Enables the IP SLA responder for UDP echo or jitter
operations.
responder, on page 203
Schedules an IP SLA operation.schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 151
IP Service Level Agreement Commands
ipsla

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English