Cisco XR 1200 series User Manual

Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to configure MPLS LSP path parameters:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# monitor 1
RP/0/0/CPU0:router(config-ipsla-mplslm-def)# type mpls lsp ping
RP/0/0/CPU0:router(config-ipsla-mplslm-lsp-ping)# path discover
RP/0/0/CPU0:router(config-ipsla-mplslm-lsp-lpd)# path retry 12
RP/0/0/CPU0:router(config-ipsla-mplslm-lsp-lpd)# path secondary frequency both 10
Related Commands
DescriptionCommand
Configures MPLS LSP echo parameters.path discover echo, on page 184
Configures MPLS LSP scan parameters.path discover scan, on page 188
Configures MPLS LSP session parameters.path discover session, on page 190
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 187
IP Service Level Agreement Commands
path discover path

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English