RP/0/0/CPU0:router(config-ipsla-react)# react packet-loss dest-to-source
RP/0/0/CPU0:router(config-ipsla-react-cond)#
The following example shows how to use the react command with the rtt keyword:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# reaction operation 432
RP/0/0/CPU0:router(config-ipsla-react)# react rtt
RP/0/0/CPU0:router(config-ipsla-react-cond)#
The following example shows how to use the react command with the timeout keyword:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# reaction operation 432
RP/0/0/CPU0:router(config-ipsla-react)# react timeout
RP/0/0/CPU0:router(config-ipsla-react-cond)#
The following example shows how to use the react command with the verify-error keyword:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# reaction operation 432
RP/0/0/CPU0:router(config-ipsla-react)# react verify-error
RP/0/0/CPU0:router(config-ipsla-react-cond)#
Related Commands
DescriptionCommand
Specifies what action or combination of actions the
operation performs when you configure the react
command or when threshold events occur.
action (IP SLA), on page 117
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Sets the lower-limit and upper-limit values.threshold, on page 267
Takes action on average values to violate a threshold.threshold type average, on page 269
Takes action after a number of consecutive violations.threshold type consecutive, on page 271
Takes action immediately upon a threshold violation.threshold type immediate, on page 273
Takes action upon X violations in Y probe operations.threshold type xofy, on page 275
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
194 OL-24735-01
IP Service Level Agreement Commands
react
To Next Page
Loading...
Need help?
General
