Examples
The following example shows how to specify that a reaction should occur if there is a status violation for the
monitored LPD group:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# reaction monitor 1
RP/0/0/CPU0:router(config-ipsla-mplslm-react)# react lpd lpd-group action logging
Related Commands
DescriptionCommand
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
196 OL-24735-01
IP Service Level Agreement Commands
react lpd
To Next Page
Loading...
