Cisco XR 1200 series User Manual

RP/0/0/CPU0:router(config-ipsla)# reaction operation 432
RP/0/0/CPU0:router(config-ipsla-react)# react timeout
RP/0/0/CPU0:router(config-ipsla-react-cond)# threshold type immediate
The following example shows how to use the threshold type immediate command in IP SLA MPLS LSP
monitor reaction condition configuration mode:
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# reaction monitor 2
RP/0/0/CPU0:router(config-ipsla-mplslm-react)# react connection-loss
RP/0/0/CPU0:router(config-ipsla-mplslm-react-cond)# threshold type immediate
Related Commands
DescriptionCommand
Specifies what action or combination of actions the
operation performs.
action (IP SLA), on page 117
Configures MPLS label switched path (LSP)
monitoring.
mpls lsp-monitor, on page 172
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Configures MPLS LSP monitoring reactions.reaction monitor, on page 197
Configures certain actions that are based on events
under the control of the IP SLA agent.
reaction operation, on page 199
Specifies an element to be monitored for a reaction.react, on page 192
Sets the lower-limit and upper-limit values.threshold, on page 267
Takes action on average values to violate a threshold.threshold type average, on page 269
Takes action after a number of consecutive violations.threshold type consecutive, on page 271
Takes action upon X violations in Y probe operations.threshold type xofy, on page 275
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
274 OL-24735-01
IP Service Level Agreement Commands
threshold type immediate

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English