Cisco XR 1200 series User Manual

•
IP SLA ICMP path-jitter
•
IP SLA UDP echo
•
IP SLA UDP jitter
•
IP SLA MPLS LSP ping
•
IP SLA MPLS LSP trace
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to use the vrf command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type udp echo
RP/0/0/CPU0:router(config-ipsla-udp-echo)# vrf vpn2
Related Commands
DescriptionCommand
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Configures an IP SLA ICMP echo operation.type icmp echo, on page 283
Configures an IP SLA ICMP path-echo operation.type icmp path-echo, on page 284
Configures an IP SLA ICMP path-jitter operation.type icmp path-jitter, on page 285
Configures an IP SLA UDP echo operation.type udp echo, on page 290
Configures an IP SLA UDP jitter operation.type udp jitter, on page 291
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
296 OL-24735-01
IP Service Level Agreement Commands
vrf (IP SLA)

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English