Cisco XR 1200 series User Manual

The no logging history command resets the history level to the default.
Task ID
OperationsTask ID
read, writelogging
Examples
This example shows how to change the level of messages sent to the history table and to the SNMP server to
alerts (1), which means that messages at the severity level of alerts (1) and emergencies (0) are sent:
RP/0/0/CPU0:router(config)# logging history alerts
Related Commands
DescriptionCommand
Changes the number of messages stored in the history
table.
logging history size, on page 327
Displays information about the state of the syslog
history table.
show logging history, on page 348
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
326 OL-24735-01
Logging Services Commands
logging history

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English