Examples
This example shows how to specify that the IP address for Packet-over-SONET/SDH (POS) interface 0/1/0/1
be set as the source IP address for all messages:
RP/0/0/CPU0:router(config)# logging source-interface pos 0/1/0/1
Related Commands
DescriptionCommand
Specifies a syslog server host as a destination for
syslog messages.
logging, on page 308
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 335
Logging Services Commands
logging source-interface
To Next Page
Loading...
