Cisco XR 1200 series

(Optional) Displays syslog messages from the
designated node. The node-id argument is entered in
the rack/slot/modul e notation.
location node-id
(Optional) Displays syslog messages with a time
stamp equal to or higher than the time stamp specified
with the month day mm : hh : ss argument.
The ranges for the month day hh : mm : ss arguments
are as follows:
• month—The month of the year. The values for
the month argument are:
◦
january
◦
february
◦
march
◦
april
◦
may
◦
june
◦
july
◦
august
◦
september
◦
october
◦
november
◦
december
• day—Day of the month. Range is 01 to 31.
• hh :—Hours. Range is 00 to 23. You must insert
a colon after the hh argument.
• mm :—Minutes. Range is 00 to 59. You must
insert a colon after the mm argument.
• ss—Seconds. Range is 00 to 59.
start month day hh : mm : ss
(Optional) Displays syslog messages related to the
specified process.
process name
(Optional) Displays syslog messages that contain the
specified string.
string string
Command Default
None
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 345
Logging Services Commands
show logging