Cisco XR 1200 series User Manual

ModificationRelease
The following keywords were added:
•
internal
•
nonstateful
•
rulesource
•
ruletype
•
stateful
•
user
Range changed from 32 to 14 for correlationID and rule-name keywords.
Release 3.6.0
Usage Guidelines
This command displays messages from the logging correlator buffer that match the correlation ID or correlation
rule name specified. When the all-in-buffer keyword is entered, all messages in the logging correlator buffer
are displayed.
If the ruletype is not specified, then both stateful and nonstateful rules are displayed.
if the rulesource is not specified, then both user and internal rules are displayed.
Task ID
OperationsTask ID
readlogging
Examples
This is the sample output from the show logging correlator buffer command:
RP/0/0/CPU0:router# show logging correlator buffer all-in-buffer
#C_id.id:Rule Name:Source :Context: Time : Text
#14.1 :Rule1:RP/0/5/CPU0: :Aug 22 13:39:13.693 2007:ifmgr[196]: %PKT_INFRA-LINK-3-UPDOWN :
Interface MgmtEth0/5/CPU0/0, changed state to Down
#14.2 :Rule1:RP/0/5/CPU0: :Aug 22 13:39:13.693 2007:ifmgr[196]: %PKT_INFRA-LINEPROTO-3-UPDOWN
: Line protocol on Interface MgmtEth0/5/CPU0/0, changed state to Down
This table describes the significant fields shown in the display.
Table 3: show logging correlator buffer Field Descriptions
DescriptionField
Correlation ID assigned to a event that matches a
logging correlation rule.
C_id.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
48 OL-24735-01
Alarm Management and Logging Correlation Commands
show logging correlator buffer

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English