Cisco XR 1200 series User Manual

ModificationRelease
The following keyword and argument pairs were added:
•
context context
•
detail
•
location node-id
•
rulesource { internal | user }
•
ruletype { nonstateful | stateful }
•
summary
Release 3.6.0
Usage Guidelines
If the ruletype is not specified, then both stateful and nonstateful rules are displayed as the default.
If the rulesource is not specified, then both user and internally defined rules are displayed as the default.
If the summary or detail keywords are not specified, then detailed information is displayed as the default.
Task ID
OperationsTask ID
readlogging
Examples
This is sample output from the show logging correlator rule command:
RP/0/0/CPU0:router# show logging correlator rule test
Rule Name : test
Type : Non Stateful
Source : User
Timeout : 30000 Rule State: RULE_APPLIED_ALL
Rootcause Timeout : None
Context Correlation : disabled
Reissue Non Bistate : N/A
Reparent : N/A
Alarms :
Code Type: Category Group Message
Root: MGBL CONFIG DB_COMMIT
Leaf: L2 SONET ALARM
Apply Locations: None
Apply Contexts: None
Number of buffered alarms : 0
This table describes the significant fields shown in the display.
Table 4: show logging correlator rule Field Descriptions
DescriptionField
Name of defined correlation rule.Rule Name
Configured timeout for the correlation rule.Time out
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 53
Alarm Management and Logging Correlation Commands
show logging correlator rule

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English