Examples
This example shows how to configure a timeout period for a root cause alarm:
RP/0/0/CPU0:router(config)# logging correlator rule state_rule type stateful
RP/0/0/CPU0:router(config-corr-rule-st)# timeout-rootcause 50000
Related Commands
DescriptionCommand
Defines the rules by which the correlator logs
messages to the logging events buffer.
logging correlator rule, on page 22
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 75
Alarm Management and Logging Correlation Commands
timeout-rootcause
To Next Page
Loading...
Need help?
General
