Citrix SD-WAN Platforms
• Serial line: COM1
• Speed: 9600
3. Power on the appliance and as it is booting, press the following key in the Putty session to enter
the BIOS configuration screen. Keypress: DEL
4. When in the BIOS, navigate to,
a) Advanced Tab > Select
b) Boot Feature > Enter
5. When in the Boot Feature screen, change the value of the parameter Restore on AC Power Loss;
from Last State > Power ON.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 101
To Next Page
Loading...