Citrix SD-WAN Platforms
When the startup process completes, the console login prompt displays.
4. Click anywhere inside the console area to enter console mode. This turns control of your mouse
cursor over to the VM console, and enables console mode.
Note
To release console control of your cursor, press the Ctrl and Alt keys simultaneously.
5. Log into the VM console. The default login credentials for the new SD-WAN VPX-SE VM are as
follows:
• Login: admin
• Password: password
This displays the console Welcome screen.
6. Enter the following command line at the console prompt:
• To configure an IPv4 address:
management_ip
© 1999-2021 Citrix Systems, Inc. All rights reserved. 175
To Next Page
Loading...