Citrix SD-WAN Platforms
• For an IPv6 address:
set interface <IPv6 address> <prefix>
where:
– <IPv6 address> is the Management IP Address for the SD-WAN VPX-SE Virtual Appli-
ance.
– <prefix> represents a block of address space or a network.
Enter one of the following:
– SLAAC: Enables SLAAC for automatically assigning an IPv6 address to each device on
the network. SLAAC enables an IPv6 client to generate its own addresses.
– DHCP: Enables DHCP for assigning IP addresses automatically. Select stateful or
stateless based on your need.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 177
To Next Page
Loading...