Citrix SD-WAN Series

To Next Page

To Previous Page

Citrix SD-WAN Platforms

Note

AWS provides a global route table in the EC2 instance but the NetScaler SD-WAN AMI will use local

route tables so that the user can control traic forwarding to the Virtual Path.

Define route tables for the WAN subnet

To define route tables:

1. From the AWS management console, select Route Tables > Create Route Table to create route

tables for the Mgmt, LAN, and WAN subnets.

2. Enter the details for the WAN subnet:

• Name tag: name to identify dierent subnets (Mgmt, LAN, or WAN)

• VPC: The previously created VPC

3. With the newly created route table still highlighted, select Subnet Association > Edit.

4. Make the association with the desired subnet, then click Save.

5. With the newly created route table still highlighted, select Routes > Edit.

6. Click Add another route button (only required for the Mgmt, and WAN subnets), then Save.

• Destination: 0.0.0.0/0

• Target: <The Internet Gateway> (igw-xxxxxxx previously defined)

Citrix SD-WAN Series - Page 280