Citrix SD-WAN Series - Page 281

Citrix SD-WAN Platforms
Define route tables for the LAN subnet
To define route tables for the LAN subnet:
1. From the AWS management console, select Route Tables > Create Route Table to create route
tables for the Mgmt, LAN, and WAN subnets.
2. Enter the details for the LAN subnet:
• Name tag: name to identify dierent subnets (Mgmt, LAN, or WAN)
• VPC: The previously created VPC
3. With the newly created route table still highlighted, select Subnet Association > Edit.
4. Make the association with the desired subnet, then click Save.
Note
To route LAN side traic through SD-WAN, associate the target destination as the SD-WAN LAN
interface id in the SD-WAN LAN route table. The target for any destination can be set to interface
id only aer creating the instance and attaching network interfaces to that instance.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 281