Citrix SD-WAN Platforms
Accessing the appliance by using the Access Console
The LOM port allows you to remotely access and manage the appliance by logging on to a redirected
console.
To access the appliance by using the access console
1. In a web browser, type the IP address of the LOM port.
2. In the User Name and Password boxes, type the administrator credentials.
3. In the Menu bar, click Remote Control.
4. Under Options, click Console Redirection.
5. Click Launch Console, and then click Yes.
6. Type the administrator credentials for the appliance.
Obtaining Health monitoring Information
You can log on to the LOM port to view the health information about the appliance. All system sensor
information, such as system temperature, CPU temperature, status of fanand power supplies, appears
on the sensor readings page.
To obtain health monitoring information
1. In a web browser, type the IP address of the LOM port.
2. In the User Name and Password boxes, type the administrator credentials.
3. In the Menu bar, click
System Health
.
4. Under
Options
, click
Sensor Readings
.
Power Control Operations using the LOM Port
You can remotely perform dierent power control operations, such as restarting the appliance, per-
forming a graceful shutdown, and performing a forced shutdown, by using the LOM port.
To perform power control operations
1. In a web browser, log on to the LOM port by using the administrator credentials.
2. In the Menu bar, click Remote Control.
3. Under Options, click Power Control, and then select one of the following options:
• Reset System—Restart the appliance.
• Power O System – Immediate—Disconnect power to the appliance without shutting
down the appliance.
• Power On System—Turn on the appliance.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 41
To Next Page
Loading...
Need help?
General