Citrix SD-WAN Series User Manual

Citrix SD-WAN Platforms
Port Labels Type Description
1/4 Management port The management port is used
to connect directly to the
appliance for system
administration functions. You
can use this port for initial
provisioning of the appliance.
From Citrix SD-WAN version
11.1.1 and above you can use
the port 1/4 as a data port or a
management port per the
configuration. For more
information, see Configurable
Management or Data port.
USB 2 USB ports USB ports
Serial
RJ-45/RS-232
An RS232 serial console port.
Power Power button Power OFF state: Press the
power button and release it
immediately: Power on the
appliance.
Press the power button and
hold it for 10+ seconds:
Factory resets the appliance.
The appliance takes around 7
min for a factory reset.
Power ON state: Press the
power button and release it
immediately: Orderly shut
down the appliance.
Press the power button and
hold it for 5+ seconds: Force
shut down the appliance.
DC 12 V DC Power Supply Refer System Specifications
for power supply information.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 56

Citrix SD-WAN Series Specifications

General

Product Type	SD-WAN Appliance
Product Series	SD-WAN
Network Interfaces	Gigabit Ethernet
Performance	Varies by model
Form Factor	Rackmount
Management	CLI
Throughput	Varies by model
Interfaces	Ethernet
VPN Support	IPsec, SSL VPN
High Availability	Yes
Security Features	Firewall
WAN Optimization	Application Acceleration, Data Deduplication, Compression