Citrix SD-WAN Series User Manual

Citrix SD-WAN Platforms
LED Description
Soware power cycle: Flashing green for ~15
seconds (shutdown time) and then flashing
blue for ~25 seconds and then solid green
Wi-Fi OFF: Not using Wi-Fi
Flashing green: Wi-Fi is configured but not in
use
Solid green: Wi-Fi is actively used
Note
Port 1/1 is the default LAN port and port 1/2 is the default WAN port. Port 1/3 is disabled. The
default LAN IP is 192.168.101.1. The WAN port is configured as a DHCP client.
Port Labels Type Description
1/1, 1/2, and 1/3 Data ports The data ports are used to
carry Network traic.
1/4 Management port The management port is used
to connect directly to the
appliance for system
administration functions. You
can use this port for initial
provisioning of the appliance.
From Citrix SD-WAN version
11.1.1 and above you can use
the port 1/4 as a data port or a
management port per the
configuration. For more
information, see Configurable
Management or Data port.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 61

Citrix SD-WAN Series Specifications

General

Product Type	SD-WAN Appliance
Product Series	SD-WAN
Network Interfaces	Gigabit Ethernet
Performance	Varies by model
Form Factor	Rackmount
Management	CLI
Throughput	Varies by model
Interfaces	Ethernet
VPN Support	IPsec, SSL VPN
High Availability	Yes
Security Features	Firewall
WAN Optimization	Application Acceleration, Data Deduplication, Compression