Citrix SD-WAN Platforms
Port Labels Type Description
USB 2 USB ports USB 2.0 ports
Serial RJ-45/RS-232 An RS232 serial console port
Power Power button Power OFF state: Press the
power button and release it
immediately: Power on the
appliance
Press the power button and
hold it for 10+ seconds:
Factory resets the appliance.
The appliance takes around 7
min for a factory reset.
Power ON state: Press the
power button and release it
immediately: Orderly shut
down the appliance.
Press power button and hold
it for 5+ seconds: Force shut
down the appliance.
DC 12 V DC Power Supply Refer System Specifications
for power supply information.
Mounting the SD-WAN 110 SE appliance
The Citrix SD-WAN 110-SE appliance can be installed in the following installation modes:
• Desktop mount
• Wall mount
• Rack mount
Desktop mount
The Citrix SD-WAN 110-SE appliance can be desktop mounted using the rubber feet shipped in the
appliance package.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 62
To Next Page
Loading...