To get support
8-4 Chapter 8: Service & maintenance 99-145912-A
2. Click the menu item Self test.
8..1.1.5 Reset to factory defaults
You can reset the SAILOR 100 GX ADU and ACU to factory defaults. See
To reset to factory default - ADU and ACU on page 6-36.
You can reset the SAILOR 100 GX GMU to factory defaults. See Reset
to factory default - GMU on page 6-37.
8..1.1.6 Proxy server settings in your browser
If you are connecting your computer using a LAN or WLAN interface,
the Proxy server settings in your browser must be disabled before
accessing the web interface. Most browsers support disabling of the
Proxy server settings for one specific IP address, so you can disable
Proxy server settings for the web interface only, if you wish. Consult
your browser help for information.
To disable the use of a Proxy server completely, do as follows:
1. In Microsoft Internet Explorer, select Tools > Internet Options >
Connections > LAN Settings.
2. Clear the box labelled Use a proxy server for your LAN.
Warning! The SAILOR 100 GX will reboot to
perform the self test. Rebooting the ACU will
terminate all existing connections.
Warning! Reset to factory default will delete all
settings, including satellite and VSAT modem
profiles, blocking zones, network setup, user
permissions and ACU display brightness settings.
The following description is for Microsoft Internet
Explorer. If you are using a different browser, the
procedure may be different.
To Next Page
Loading...
Need help?
General
