Codan HF SSB User Manual

Display messages
HF SSB transceiver reference manual 10-3
Message Meaning Action
Bad record type
XX
Data was corrupted during
XP programming.
Check the XP cables. Switch the
transceiver off and then on
again. If the problem remains,
contact your Codan agent for
help.
Bad type/inst
XX/XX
The transceiver detected an
internal data fault.
Switch the transceiver off and
then on again. If the problem
remains, contact your Codan
agent for help.
BBRAM
Ck/Sum Err
Data in the battery backup
RAM has become
corrupted.
Contact your Codan agent for
help.
BBRAM update
failed
The transceiver cannot
read/write data to the
battery backup RAM.
Contact your Codan agent for
help.
Call stack
empty
There are no calls stored in
the call memory.
Refer to the HF SSB transceiver
user guide, Chapter 5,
Reviewing calls held in memory.
Channel not
found
This channel number is not
used.
Select a channel that exists.
Channel
protected
The current channel is
protected against change or
deletion.
Contact your Codan agent if you
need to delete or change this
channel.
Channel space
full
The maximum number of
channels have been set up.
If you want to add channels, first
delete unwanted channels that
are not protected (NP). See
Chapter 3, Channel deletion. For
protected channels (P), contact
your Codan agent for help.
Channel used This channel already exists
and you are about to
change its channel settings.
Continue unless you do not want
to change this channel. See
Chapter 3, Channel creation and
editing.
Display messages
HF SSB transceiver reference manual 10-3
Message Meaning Action
Bad record type
XX
Data was corrupted during
XP programming.
Check the XP cables. Switch the
transceiver off and then on
again. If the problem remains,
contact your Codan agent for
help.
Bad type/inst
XX/XX
The transceiver detected an
internal data fault.
Switch the transceiver off and
then on again. If the problem
remains, contact your Codan
agent for help.
BBRAM
Ck/Sum Err
Data in the battery backup
RAM has become
corrupted.
Contact your Codan agent for
help.
BBRAM update
failed
The transceiver cannot
read/write data to the
battery backup RAM.
Contact your Codan agent for
help.
Call stack
empty
There are no calls stored in
the call memory.
Refer to the HF SSB transceiver
user guide, Chapter 5,
Reviewing calls held in memory.
Channel not
found
This channel number is not
used.
Select a channel that exists.
Channel
protected
The current channel is
protected against change or
deletion.
Contact your Codan agent if you
need to delete or change this
channel.
Channel space
full
The maximum number of
channels have been set up.
If you want to add channels, first
delete unwanted channels that
are not protected (NP). See
Chapter 3, Channel deletion. For
protected channels (P), contact
your Codan agent for help.
Channel used This channel already exists
and you are about to
change its channel settings.
Continue unless you do not want
to change this channel. See
Chapter 3, Channel creation and
editing.

Codan HF SSB Specifications

General

Brand	Codan
Model	HF SSB
Category	Transceiver
Language	English