Codan HF SSB User Manual

Channel and scan table setup
HF SSB transceiver reference manual 3-5
Action Notes
4.
Enter the number of
the new channel
numeral
button
Do not enter the number of a
channel that already exists.
5.
Press
Enter
R'call
Continue  Step 9.
Example of the display:
EXIT ENTER
Enter Receive Freq.
RX 4,0100
.
If you entered the number of a
channel that already exists, the
transceiver beeps. Start the
procedure again by pressing
PTT
6.
(From Step 3.)
To edit this channel,
press
Enter
R'call
If this channel is protected, the
display looks like this:
CLEAR ENTER
Enter channel text
If this channel is unprotected,
the display looks like this:
EXIT
ENTER
Channel used
Enter to continue.
– 208
Channel and scan table setup
HF SSB transceiver reference manual 3-5
Action Notes
4.
Enter the number of
the new channel
numeral
button
Do not enter the number of a
channel that already exists.
5.
Press
Enter
R'call
Continue  Step 9.
Example of the display:
EXIT ENTER
Enter Receive Freq.
RX 4,0100
.
If you entered the number of a
channel that already exists, the
transceiver beeps. Start the
procedure again by pressing
PTT
6.
(From Step 3.)
To edit this channel,
press
Enter
R'call
If this channel is protected, the
display looks like this:
CLEAR ENTER
Enter channel text
If this channel is unprotected,
the display looks like this:
EXIT
ENTER
Channel used
Enter to continue.
– 208

Codan HF SSB Specifications

General

Brand	Codan
Model	HF SSB
Category	Transceiver
Language	English