Codan HF SSB - Page 34

Channel and scan table setup
3-8 HF SSB transceiver reference manual
Action Notes
16.
To change the tone call
group setting, rotate
Select
Select:
•
T1
to
T4
to use this
channel for tone calls
•
T-
to disallow tone calls on
this channel.
17.
To move to the selcall
group setting, rotate
Volume
Example of the display:
EXIT
ENTER
Enter Options
Self Id: – – – – – – Codan
U T1 S1 NP
18.
To change the selcall
group setting, rotate
Select
Select:
•
S1
to
S5
to use this
channel for selcalls
•
S-
to disallow selcalls on
this channel.
19.
To move to the channel
protection setting,
rotate
Volume
Example of the display:
EXIT ENTER
Enter Options
Not protected
U T1 S1 NP
or
EXIT ENTER
Enter Options
Not protected
U NP
Channel and scan table setup
3-8 HF SSB transceiver reference manual
Action Notes
16.
To change the tone call
group setting, rotate
Select
Select:
•
T1
to
T4
to use this
channel for tone calls
•
T-
to disallow tone calls on
this channel.
17.
To move to the selcall
group setting, rotate
Volume
Example of the display:
EXIT
ENTER
Enter Options
Self Id: – – – – – – Codan
U T1 S1 NP
18.
To change the selcall
group setting, rotate
Select
Select:
•
S1
to
S5
to use this
channel for selcalls
•
S-
to disallow selcalls on
this channel.
19.
To move to the channel
protection setting,
rotate
Volume
Example of the display:
EXIT ENTER
Enter Options
Not protected
U T1 S1 NP
or
EXIT ENTER
Enter Options
Not protected
U NP