EasyManua.ls Logo

Compaq AlphaServer ES40 - Page 142

Compaq AlphaServer ES40
444 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-38 Compaq AlphaServer ES40 Service Guide
Options
-m
Timer. Prints out the run time of the pass. Default = off .
-z
Tests the specified memory address without allocation. Bypasses
all checking but allows testing in addresses outside of the main
memory heap. Also allows unaligned input.
CAUTION: This flag can overwrite the console. If the system
hangs, press the Reset button.
-d
Used only for march test (2). Uses this pattern as test pattern.
Default = 5’s
-h
Allocates test memory from the firmware heap.
-rs
Used only for random test (3). Uses this data as the random seed
to vary random data patterns generated. Default = 0.
-rb
Randomly allocates and tests all of the specified memory address
range. Allocations are done of block_size.
-mb
Memory barrier flag. Used only in the -f graycode test. When set
an mb is done after every memory access. This guarantees serial
access to memory.
-ba
Used only for block test (4). Uses the data stored at this address to
write to each block.

Table of Contents

Other manuals for Compaq AlphaServer ES40

Related product manuals