Registers D-31
D.13
21272-CA Pchip Error Register (PERROR)
If any bits <11:0> are set, this register is frozen. Only bit <0> can be set
thereafter. All other values are held until all bits <11:0> are clear.
When an error occurs and one of the <11:0> bits is set, the associated
information is captured in bit <63:16>. After the information is
captured, the INV bit is cleared, but the information is not valid and
should not be used if INV is set.
Address 801 8000 03C0 P0 ERROR
803 8000 03C0 P1 ERROR
Continued on next page
To Next Page
Loading...
