SRM Console Diagnostics 4-45
4.17
set sys_serial_num
The set sys_serial_num command sets the system serial number. This
command is used by Manufacturing for establishing the system serial
number, which is then propagated to all FRU devices that have
EEPROMs. The sys_serial_num environment variable can be read by
the operating system.
Example 4–19 set sys_serial_num
P00>>> set sys_serial_num NI900100022
When the system motherboard (SMB) is replaced, you must use the set
sys_serial_num command to restore the master setting.
Syntax
set sys_serial_num value
Value is the system serial number, which is printed on the system chassis.
To Next Page
Loading...
Need help?
General
