Compaq AlphaServer ES40 - 7.7 Resetting the RMC to Factory Defaults

7-30 Compaq AlphaServer ES40 Service Guide
7.7 Resetting the RMC to Factory Defaults
If the non-default RMC escape sequence has been lost or forgotten,
RMC must be reset to factory settings to restore the default escape
sequence.
Figure 7–4 RMC Jumpers (Default Positions)
PK0211
1 2 3
1 2
J24
J25
J26
J31
J3
J2
J1
NOTE: J1, J2, and J3 are reserved.