Compaq AlphaServer ES40 User Manual

7-12 Compaq AlphaServer ES40 Service Guide
7.5 SRM Environment Variables for COM1
Several SRM environment variables allow you to set up the COM1
serial port (MMJ) for use with the RMC.
You may need to set the following environment variables from the SRM console,
depending on how you decide to set up the RMC.
com1_baud
Sets the baud rate of the COM1 serial port and the
modem port. The default is 9600.
com1_flow
Specifies the flow control on the serial port. The
default is software.
com1_mode
Specifies the COM1 data flow paths so that data
either flows through the RMC or bypasses it. This
environment variable can be set from either the SRM
or the RMC.
com1_modem
Specifies to the operating system whether or not a
modem is present.
See the Compaq AlphaServer ES40 User Interface Guide for information on
setting SRM environment variables.

Compaq AlphaServer ES40 Specifications

General

Brand	Compaq
Model	AlphaServer ES40
Category	Server
Language	English