Error Logs 5-3
5.1.1 WEB Enterprise Service (WEBES) Director
Compaq Analyze uses the functionality contained in the WEBES
Director, a process that executes continuously on the machine. The
Director manages the processing of system error events and provides
analysis message routing for the system. Compaq Analyze provides the
functionality for system event analysis and translation.
NOTE: WEBES was formerly known as DESTA.
The initial release of Compaq Analyze, V1.0, included the common WEBES
code. Subsequent releases of Compaq Analyze will continue to ship with the
common WEBES code.
The Director is started when the system is booted. Normally you do not need to
start the Director. If the Director has stopped running, restart it by following
the instructions in the WEBES documentation for the specific operating system.
Compaq Analyze includes a graphical user interface (GUI) that allows the user
to interact with the Director. While only one Director process executes on the
machine at any time, many GUI processes can run at the same time, connected
to the single Director. Refer to the Compaq Analyze installation and user
manuals for the respective operating system to launch the Compaq Analyze
GUI. The Compaq Services service tools Web site available to customers is:
http://www.service.digital.com/svctools
The Compaq Analyze documentation includes the following:
•
Compaq Analyze User’ s Guide
•
Compaq Analyze Installation Guide for Tru64 UNIX
•
Compaq Analyze Installation Guide for OpenVMS
•
Compaq Analyze Installation Guide for Windows NT
•
Compaq Analyze Releases Notes
To Next Page
Loading...
Need help?
General
