System Configuration and Setup 6-29
6.7.1 Running Utilities from a VGA Monitor
If you are running Windows NT, no terminal setup is required for
running utilities.
Figure 6–7 AlphaBIOS Utilities Menu
AlphaBIOS Setup
PK0954a
Display System Configuration...
Upgrade AlphaBIOS
Hard Disk Setup...
CMOS Setup...
Install Windows NT
Utilities
About AlphaBIOS...
F1=Help
Display Error Frames...
OS Selection Setup...
Run Maintenance Program...
ESC=Exit
Running a Utility from a VGA Monitor
1.
Start the AlphaBIOS console.
2.
Press F2 from the Windows NT Boot screen to display the AlphaBIOS Setup
screen.
3.
From AlphaBIOS Setup, select Utilities, then select Run Maintenance
Program from the sub-menu that is displayed, and press Enter.
To Next Page
Loading...
Need help?
General
