System Configuration and Setup 6-33
1.
Issue the alphabios command at the P00>>> prompt to start the
AlphaBIOS console.
2.
From the AlphaBIOS Boot screen, press F2.
3.
From AlphaBIOS Setup, select Utilities, and select Run Maintenance
Program from the sub-menu that is displayed. Press Enter.
4.
In the Run Maintenance Program dialog box, type the name of the program
to be run in the Program Name field. Then tab to the Location list box, and
select the hard disk partition, floppy disk, or CD-ROM drive from which to
run the program.
5.
Press Enter to execute the program.
To Next Page
Loading...
Need help?
General
