FRU Removal and Replacement 8-11
To Remove Enclosure Panels from a Tower
The enclosure panels are secured by captive screws.
1.
Remove the front door.
2.
To remove the top panel, loosen the top left and top right captive screws
➊.
Slide the top panel back and lift it off the system.
3.
To remove the left panel, loosen the captive screw
➋ at the top and the
captive screw
➌ at the bottom. Slide the panel back and then tip it
outward. Lift it off the system.
To Next Page
Loading...
Need help?
General
