FRU Removal and Replacement 8-25
Hard drives are hot-plug components.
CAUTION: Before replacing a hard disk drive, ensure that the SCSI controller
and/or the operating system support hot-swapping of drives.
Otherwise, shut down the operating system and return to the SRM
console level before starting the replacement procedure.
Removing a Hard Disk Drive
1.
Access the storage drive area.
2.
Push the button
➊ to release the plastic handle ➋ on the front of the drive
carrier. Pull out the plastic handle toward you and slide the drive out.
NOTE: Remove the blank cover from the next available slot before installing an
additional hard disk drive.
To Next Page
Loading...
Need help?
General
