FRU Removal and Replacement 8-31
4.
Install the new DIMM. Align the notches on the gold fingers with the
connector keys (Figure 8–14) and secure the DIMM with the clips on the
MMB slot.
5.
Reinstall the MMB and secure it to the system backplane with the clips.
Verification — SRM Console
1.
Turn on power to the system.
2.
During power-up, observe the screen display for memory.
3.
Issue the show memory command to display the total amount of memory
in the system.
Verification — AlphaBIOS Console
1.
Start AlphaBIOS Setup, select Display System Configuration, and press
Enter.
2.
Using the arrow keys, select Memory Configuration to display the new
memory.
To Next Page
Loading...
Need help?
General
