Compaq AlphaServer ES40 User Manual

FRU Removal and Replacement 8-41
Removing the I/O Connector Assembly
You must shut the system down before removing the I/O connector assembly.
1. Unplug all I/O connectors from the rear of the unit.
2. Remove the cover from the PCI card cage.
3. Unplug the 68-pin signal cable
➊.
4. Remove the two screws
➋ that secure the assembly to the back of the unit.
5. Pull the assembly out through the PCI area.

Compaq AlphaServer ES40 Specifications

General

Brand	Compaq
Model	AlphaServer ES40
Category	Server
Language	English