Index-1
Index
A
AAR memory addresses, E-2
Acceptance testing, 2-11
Advanced CMOS Setup screen, 6-23
Alpha System Reference Manual, 4-26
alphabios command, 6-4
AlphaBIOS console
Auto Start option, 6-25
boot screen, 3-21, 6-3
hard disk setup, 6-22
initialization screen, 3-20
memory test, 6-23
running in serial mode, 6-32
setting date and time, 6-21
setup screen, 6-2
startup screens, 3-20
AlphaBIOS error frames, 5-20
AlphaBIOS firmware
obtaining, 2-14
AlphaBIOS menus, 2-10
AlphaBIOS utilities, 6-28
Architecture, 1-2
Auto start, 6-24
UNIX or OpenVMS, 6-26
Windows NT, 6-25
auto_action environment variable, 6-12, 6-26
Autoboot, 6-24
AUX_5V LED, 1-25
AUX_5V power supply, 1-20
Auxiliary power supply, RMC, 7-3
B
Beep codes, 3-22
Boot device, setting, 6-27
Boot problems, 2-7
Boot screen, AlphaBIOS, 3-21, 6-3
Boot selections, Windows NT
changing default, 6-25
boot_file environment variable, 6-12
boot_osflags environment variable, 6-12
bootdef_dev environment variable, 6-12
buildfru command, 4-4
Bypass modes, 7-6
Bypassing the RMC, 7-6
C
Cables, 8-2
cat el command, 4-8
CCAT, 2-11
C-chip, 1-3
CD-ROM drive, 1-6
part number, 8-4
Chassis
accessing in a cabinet, 8-14
front components, 1-6
rear components, 1-7
removing covers from, 8-16
Checksum error, 3-24
Chipset, 1-3
clear password command, 6-36
clear_error all command, 4-10, 8-1, 8-9
clear_error command, 4-10, 4-48
Clearing checksum errors, 4-48
Clearing errors, 4-10
Clock generator settings, B-6
CMOS Setup screen, 6-21
COM1 data flow, defining, 7-15
COM1 environment variables, 7-12
COM1 MMJ port, 1-9
com1_modem environment variable, 6-15