vii
4.7 exer......................................................................................................4-16
4.8 floppy_write.........................................................................................4-21
4.9 grep .....................................................................................................4-22
4.10 hd ........................................................................................................4-24
4.11 info ......................................................................................................4-26
4.12 kill and kill_diags................................................................................4-31
4.13 memexer..............................................................................................4-32
4.14 memtest...............................................................................................4-34
4.15 net .......................................................................................................4-39
4.16 nettest .................................................................................................4-41
4.17 set sys_serial_num..............................................................................4-45
4.18 show error...........................................................................................4-46
4.19 show fru...............................................................................................4-49
4.20 show_status.........................................................................................4-52
4.21 sys_exer...............................................................................................4-54
4.22 test.......................................................................................................4-56
Chapter 5 Error Logs
5.1 Error Log Analysis with Compaq Analyze............................................5-2
5.1.1 WEB Enterprise Service (WEBES) Director ..................................5-3
5.1.2 Invoking the GUI............................................................................5-4
5.1.3 Problem Found Report....................................................................5-6
5.2 Fault Detection and Reporting ...........................................................5-12
5.3 Machine Checks/Interrupts ................................................................5-14
5.1.1 Error Logging and Event Log Entry Format................................5-16
5.4 Environmental Errors Captured by SRM...........................................5-18
5.5 Windows NT Error Logs .....................................................................5-20
5.5.1 Viewing a Formatted Text-Style Error Frame .............................5-24
5.5.2 Viewing a Binary Dump of the Error Frame................................5-26
5.5.3 Saving the Error Frame to the Floppy .........................................5-27
5.5.4 Deleting an Error Frame..............................................................5-30
Chapter 6 System Configuration and Setup
6.1 System Consoles....................................................................................6-2
6.1.1 Switching Between Consoles..........................................................6-4
6.1.2 Selecting the Console and Display Device......................................6-5
6.1.3 Setting the Control Panel Message ................................................6-7
6.2 Displaying the Hardware Configuration ..............................................6-8
6.3 Setting Environment Variables for Tru64 UNIX or OpenVMS..........6-10
6.4 Setting Up a System for Windows NT................................................6-20
To Next Page
Loading...
Need help?
General
