Power-Up Diagnostics and Display 3-13
SRM Power-Up Sequence (Continued)
➎
The console is started on the secondary CPUs. The example shows a four-
processor system.
➏
Various diagnostics are performed.
➐
Systems running UNIX or OpenVMS display the SRM console banner and
the prompt, Pnn>>>. The number n indicates the primary processor. In a
multiprocessor system, the prompt could be P00>>>, P01>>>, P02>>>, or
P03>>>. From the SRM prompt, you can boot the UNIX or OpenVMS
operating system.
NOTE: If the console requires the heap to be expanded, it restarts. See
Section 3.3.3.
To Next Page
Loading...
Need help?
General
