Contax I4R - Erasing All the Images (ERASE ALL)

Introduction Getting Ready Taking Pictures Playback Set Up
EN-103
BACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
Erasing all the images (ERASE ALL)
You can use the procedure below to erase all the images recorded on a
memory card.
1 Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2 Press the MENU button K to display the menu icons.
3 Press the 4-way button left or right to
select ERASE MULTIPLE [I] and press
the OK button E.
The multiple erase screen appears.
4 Press the 4-way button up or down to
select [ERASE ALL], then press the OK
button E.
A message appears asking you to confirm that you want to erase the
images.
5 Press the 4-way button up to select
[EXECUTE], then press the OK button E.
All the images are erased and the "NO IMAGE" message appears.
A Important
• You cannot erase protected images (Æ p.104).
• When you erase an image with a postrecorded voice message (Æ p.107
), the sound
file is also erased.
A Important
If there are images still shown after you use
[ERASE ALL], those images may be protected. To
forcibly erase all the images, format the memory
card. ( "
[FORMAT] Initializing a Memory Card"
Æ p.161
)
ERASE MULTIPLE
ERASE MULTIPLE
SELECT AND ERASE
ERASE ALL
RETURN
ERASE ALL?
EXECUTE
CANCEL