Contax I4R - ZLANGUAGE] Selecting the Menu Language

Introduction Getting Ready Taking Pictures Playback Set Up
EN-177
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[ Z LANGUAGE] Selecting the Menu Language
You can choose one of the following as the language displayed on the
camera's screens:
• Japanese (Default)
• English
• French
•German
•Spanish
• Chinese (Simplified)
1 Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2 Press the 4-way button up or down to
select [ZLANGUAGE], then press right.
3 Press the 4-way button up or down to
select the language, then press the OK
button E.
The selected setting is applied.
BNote
This setting is retained when you turn the camera off.
BEEP
SHUTTER VOL
START SCREEN
REC REVIEW
+2
+2
SET
2SEC
ENGLISH
VIDEO OUT NTSC
SET UP(2/3)
LANGUAGE
BEEP
SHUTTER VOLSHUTTER VOL
START SCREENSTART SCREEN
REC REVIEWREC REVIEW
VIDEO OUT
SET UP(2/3)
LANGUAGE
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL