Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-104
NEXT
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[
U
] Protecting Images from Accidental Erasing (PROTECT)
«Applicable images: Still images / movies»
This feature enables you to protect important images to ensure that they
are not inadvertently erased.
Protecting an image
1 Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2 Press the MENU button K to display the menu icons.
3 Press the 4-way button left or right to
select PROTECT [U] and press the OK
button E.
4 Press the 4-way button left or right to select the image to be
protected.
5 Press the 4-way button up to select [SET],
then press the OK button E.
The [U] icon appears on protected images.
BNote
These settings can also be changed in MULTI playback / GROUP playback (Æ p.87) and
QuickView (Æ p.50
) modes.
BNote
• To protect another image, repeat steps 4 and 5.
• In GROUP playback, all of the images in a
group of continuous shots are protected when
you protect an image from a group.
PROTECT
SET
RETURN
PROTECT?
To Next Page
Loading...
Need help?
General
