Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-80
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[CHROMA] Changing the color intensity
«Applicable mode: C»
The [CHROMA] setting lets you take pictures in which the intensity of the
colors is increased (brighter colors) or decreased (paler colors).
1 Turn the camera on and press the mode
button until "C" lights up on the mode
select LED.
2 Press the MENU button K to display the menu icons.
3 Press the 4-way button left or right to
select CHROMA [H] and press the OK
button E.
4 Press the 4-way button up or down to
select the desired setting and press the
OK button E.
The chroma setting is updated.
[H+1] [+] : Increases the color intensity.
(No icon) [STANDARD]: Uses the standard color intensity. (Default)
[H-1] [-] : Decreases the color intensity.
5 Press the MENU button K.
The icon for the selected intensity appears on the LCD monitor.
A Important
This setting is retained when you turn the camera off.
BNote
The [STANDARD] setting is used in Black and White mode and Sepia mode.
CHROMA
–
STANDARD
+
+1
To Next Page
Loading...
