Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-23
NEXTNEXT
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
LED Displays
There are 3 LEDs on the camera. The LEDs indicate the status of the
camera by either lighting or flashing.
Self-timer LED (red)
Card access LED (orange)
Flashes
While using the self-timer
Lights
When a movie is being shot
When the shutter operates and shooting has ended (does not
light for continuous shots)
When the camera is set to Playback mode
When the camera is set to SET UP mode
When the camera is connected to a PC
Flashes
Flashes while the camera is accessing the memory card, such
as recording images to memory card or reading files.
Do not open the card/battery cover or remove the memory card
while the LED is flashing as this could cause data corruption or,
in some cases, camera damage.
To Next Page
Loading...
Need help?
General
